The support of the intelligent electric foot pedal of the Mercedes-Benz G is made by all-aluminum alloy die-casting, which makes the service life of the pedal longer, receives fewer problems from customers and has a low failure rate.

1. The pedal bracket is crafted through all-aluminum alloy die-casting technology, having gone through multiple rigorous processes. This material is not only lightweight, effectively reducing the load on the vehicle body, but also boasts super corrosion resistance. It remains shiny and new without fear of being eroded by wind and rain or caked with mud. The exquisite die-casting process renders the pedal structure firm and solid, with outstanding load-bearing capacity. Whether it’s an off-road enthusiast carrying heavy equipment during a wild adventure or an urban elite gracefully getting in and out of the car in elegant attire, the pedal provides a steady support, never shaking or deforming, safeguarding every step with impeccable quality.
2. It is by no means an ordinary pedal but a thoughtful partner equipped with intelligent technology. When the car door is unlocked, the pedal, like a well-trained attendant, extends rapidly and smoothly, landing precisely in position with a perfect height difference, allowing you to step into the car effortlessly. The moment the door closes, it retracts quietly, clinging closely to the vehicle body without affecting the domineering lines and passing performance of the whole car at all. If you happen to encounter narrow roads or complex terrains during the journey and need to temporarily raise the chassis for off-roading, the pedal can also sense it intelligently and retract in a timely manner to avoid obstacles, eliminating the need for manual operation throughout the process and enabling you to enjoy the convenience and worry-free experience to the fullest.
3. The surface of the pedal has undergone special anti-slip treatment. The fine texture is like a natural suction cup, increasing the friction of the shoe sole. Even if the shoe sole is wet or muddy, you can stand firmly on it, eliminating the scary moment of slipping under your feet. The edges are carefully polished to be smooth without sharp corners, preventing accidental bumps from scratching clothes and skin. When driving at night, the pedal comes with a soft lighting system. The concealed light strip lights up quietly, clearly outlining the contour of the pedal, guiding your steps in the dark and avoiding the hidden danger of stepping into the air, comprehensively safeguarding your safety every time you get in and out of the car.

Installation Guide for Benz G Intelligent Electric Side Steps – Upgrade Your Driving Experience with Ease

Dear Mercedes-Benz G owners and off-road enthusiasts, have you always been eager to equip your beloved car with a set of intelligent electric side steps that are both practical and cool, but worried about the complicated installation process and didn’t know where to start? Don’t panic. Today, this detailed installation video script will teach you step by step. It’s full of practical tips, allowing your Mercedes-Benz G to instantly transform into a “thoughtful travel gadget”!

Introduction: Encountering Your New Intelligent Travel Companion

Imagine this: every time you approach your domineering Benz G, the moment you unlock the car door, the side steps elegantly extend automatically to the perfect height, making it as easy as walking on flat ground to get into the car. When getting out of the car, it provides a steady support, unfazed by mud or gravel. These intelligent electric side steps are not just ordinary steps; they are the best choice for showing your taste and enhancing convenience. Now, follow the camera and embark on this installation journey.

Preparations Before Installation: Sharpening Your Tools for the Job

Before we officially start the work, let’s first check our “combat equipment”. You need to prepare a professional set of car repair tools, including various wrenches and screwdrivers. A torque wrench is crucial to ensure that each screw is tightened accurately. Also, don’t forget the insulating gloves to operate safely and stay away from potential electrical hazards. Of course, make sure the side step components are complete. Check the brackets, motors, step bodies, controllers, wire harnesses, and other parts against the list to ensure nothing is missing or damaged. Once everything is ready, we’re ready to start the installation.

Removing the Original Side Steps (if any): Making Room for the New

If your Mercedes-Benz G already has ordinary side steps, the first step is to remove them. Use the appropriate-sized screwdrivers to unscrew the fixing screws on both sides and the bottom of the side steps. Be gentle to avoid scratching the car paint. After removing the screws, lift the side steps carefully and separate the clips connecting them to the car body. Pay attention not to break any wires during the process. Store the old side steps properly for future use if needed. This step is like doing a little “subtraction” for your car to make space for the new ones.

Installing the Brackets: Laying a Solid Foundation for Reliable Support

Here comes the highlight – bracket installation. First, align the all-aluminum alloy die-casting brackets with the reserved installation holes on the car body. The brackets made with this technology are lightweight, sturdy, and highly resistant to corrosion. Hold the brackets firmly and use screws to fix them preliminarily. Don’t tighten them completely yet to allow for later adjustments. When adjusting, be sure to use a level to measure and ensure the brackets are perfectly level both horizontally and vertically. This is the basis for the smooth operation of the side steps. Once everything is correct, tighten the screws and set the torque wrench to the specified value. With a few clicks, a solid foundation is established.

                                                                                               Unmatched Weight Capacity of Our Step Board

                          When it comes to reliability and strength, our step board truly stands out. Engineered with top-notch materials and a precision-crafted structure, it flaunts an impressive weight-bearing capacity. Whether you’re hauling heavy gear for an off-road adventure or multiple passengers are stepping on it daily, this step board stays rock-solid. Rigorously tested under extreme loads, it has proven its mettle time and again, ensuring your every step is safe and supported. Trust in our step board to carry whatever weight you bring its way.

Working State of the Intelligent Pedal Switch of WJ

When the WJ vehicle stands still on standby, the intelligent pedal switch is like an alert guard hidden in the dark. The moment the vehicle is unlocked, it immediately “wakes up”. With a gentle leap of electric current, it precisely triggers the pedal to extend slowly, with the perfect height and speed, welcoming passengers to get in elegantly. When the car door is closed, it responds nimbly again, neatly commanding the pedal to retract quietly and fit snugly against the vehicle body without leaving a trace. Whether it’s charging off-road or driving slowly in the urban area, when it needs to adjust flexibly in complex road conditions, it can quickly sense and promptly regulate the state of the pedal. Unafraid of bumps and obstacles, it operates stably throughout the whole process, firmly safeguarding every step, fully demonstrating its intelligence and high efficiency.

1.An advanced cooling design ensures that the motor maintains excellent heat dissipation performance even under high load operation, preventing overheating issues and ensuring long-term stable operation.

2.Utilizing advanced sealing technology and high-quality materials ensures that the motor has superior water resistance. It can operate stably even in humid environments or under rainwater intrusion, protecting internal components from water damage.

When you are longing for a comprehensive and comfortable driving experience in your luxury vehicle, the intelligent electric pedals for automobiles quietly come into play. They are far from ordinary pedals; instead, they are the crystallization of the combination of technology and craftsmanship, as well as the integration of practicality and luxury, redefining the elegance and convenience of getting in and out of the car.

Compatibility with Vehicle Models

 Intelligent electric pedals for automobiles have wide compatibility and cover numerous mainstream automobile brands and models.

Details of Core Components

1. Pedal Body: Mostly made of aviation-grade aluminum alloy and formed by high-precision die-casting technology, it is lightweight with excellent toughness and strength, strong corrosion resistance and anti-oxidation ability. It can remain as good as new even after experiencing harsh outdoor environments and daily wear and tear. The surface of the pedal has undergone anti-slip treatment with fine textures, which effectively increases the friction of the sole of the shoe. Even if the sole is wet or muddy, you can stand firmly on it without slipping. The edges are finely polished with no sharp corners to prevent scratching clothes and skin.
2. Motor Components: Generally, there are two built-in motors. Each of the left and right pedals is equipped with a powerful power source. They work together to ensure the smooth and stable extension and retraction of the pedals and respond quickly. The motors have an IP67 protection rating, with excellent waterproof, dustproof and sandproof effects. They can operate stably under heavy rain, waterlogging, muddy and sandy, and dusty road conditions, and are applicable to various complex driving scenarios.
3. Control Module: It is like the “brain” that accurately receives the signals of the opening and closing of the car door to control the operation of the motors and the movement of the pedals. It has an intelligent anti-pinch function. When the pedal senses an obstacle during the extension or retraction process, it can stop immediately and retract in the opposite direction to avoid pinching people or damaging items. Some high-end products also support the adjustment of height and speed to meet the habits and scenario needs of different users.
4. Installation Brackets and Screws: Customized exclusive installation brackets are provided according to the compatible vehicle models. They fit the original holes on the chassis to ensure the firmness of the pedals. They are paired with stainless steel screws that have strong anti-rust and fastening properties and are durable after installation.
5. Bracket System: It is made of high-strength aluminum alloy with a stable structure and good load-bearing capacity. It is precisely designed according to the chassis structures of different vehicle models to ensure that the pedals are firm and reliable after installation and can withstand the frequent stepping and squeezing of adults and heavy objects without loosening or deforming during normal use.
   

   Installation Accessories

1. Installation Brackets and Screws: Customized exclusive installation brackets are provided according to the compatible vehicle models. They fit the original holes on the chassis to ensure the firmness of the pedals. They are paired with stainless steel screws that have strong anti-rust and fastening properties and are durable after installation.
2. Wire Harnesses and Connectors: Complete and high-quality wire harnesses are provided. The wire core materials are excellent with good electrical conductivity and anti-aging properties. The connectors conform to the standards of automobile circuit interfaces, are convenient to plug and unplug, and have a tight connection to ensure the stable transmission of electricity and signals and avoid circuit problems such as poor contact and short circuits.
3. Protective Pads and Soundproof Cotton: Some products will come with protective pads, which are installed at the contact parts between the pedals and the vehicle body to buffer vibrations and reduce friction noise. Soundproof cotton is used to isolate the slight sounds generated by the operation of the motors and the extension and retraction of the pedals to maintain a quiet driving environment inside the vehicle.